|Plastic Modling Type:Extruding|
3D printer has been used by designers, engineers and scientists to produce the disposable mechanical products and model, and it is already widely used in health care, education, toys, building, automobile, electronics, and anime field.
3d filament PLA isbased materials and easy to print for variety desktop printers, besides PLA material’s advantages such as no odor, lower melting point and good flowbility, no need to post-treatment etc. 3D filament also have following advantages:
(1) High precision dimensions with 1.75+/-0.10mm range which make material supply easily and with high print quality;
(2) Good roundness with 1.75+/-0.08mm range which make material supply easily and with high print quality;
(3) Order flexibility and short lead time;
(4) Vivid color;
(5) Good logistic control and service support
(6)Our company is specialized on manufacturing 3d filament PLA filament for 3D printer, with the imported production equipment, strict quality control, very good dimensional accuracy, smooth surface, high strength, and dozens of colors to choose.
3D filament ABS filament specifications are listed below:
3d Filament Material
175 – 200 centigrade
1kg (Can be customerization )
N.W.:1kg, G.W.:1.4kg box size: 21*21*9cm ,
N.W.: 12kgs, G.W.: 16kgs carton size: 56*44*23cm
1. Produce process of 3d filament
I . Before produce extruding filament ,we will dry 3d filament ABS and PLA for a enough time (3-5 hours).
II. Mix with colors masterbatch or colors powder, all which .certified with ROHS.
III. Adjust temperature and dragging rate , make filament diameter range at 1.6-1.8mm/2.9-3.0mm, roundness +/-0.08mm, each spool net weight 1kg+/-0.05kg
IV we put all filament spool in shelf, different kind in different shelf, all categories arrange orderly.
2. Production quality control
I. we have diameter laser detect kits to control extruding rate on line, when diameter smaller or higher than accept range, the laser detect kits will adjust the extruding rate higher or smaller to make diameter range at acceptable.
II. keep each record filament samples sent to customers, build a tracking able document.
III. when the filament put on shelf longer than half a year, we will dry the filament again.
3. About waste & recycle
Much time you will find some black filament is too brittle, that added and mixed with some recycle and scrap after produced.
We haven’t produced with scrap outlet, rework & recycle material, or dispose, but for quality assurance purpose.
4. Packaging of 3d filament
We put each filament /spool on seal PE vacuum bag, then in smaller box, then out big carton
We also have vacuum heated bag to replace of PE bag, make better avoid moisture.
5. Research and developing
We have engineers that specialty in color formulation ,plastic modification, packaging, quality control ,producing control, we can do according to your requirements .
1. go by express,
if you live where far from China(like Russia, Middle East, East Euro, South America ,Africa), we will choose go by china post, maximum 2kg, , it is cheaper go by air when quantity bigger than 50kg .
if East/South Asian, West Euro, North America, Australia are good price go by express and not quantity limited.
2.go by sea,
when quantity more than 300kg, we can go by sea, it is very cheap, about $350 -500.and some fee you should pay to local port and warehouse, you can contact the shipping company to take the goods from port to your address.
when you can order one material(PLA or ABS), one color (natural, white, black, red, green, yellow, orange, blue, purple, grey),one diameter(1.75/3.0mm), minimum quantity 100kgs, you can get the best and smallest factory price, you can start from natural, white, black, since these three colors are sale well.
We also have 3d filaments of PC,NYLON,HIPS etc.
Send your message to this supplier
- Hangzhou Jieqiao Trading Co., Ltd.
What is this?This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Stainless Steel Banding system ,Paracord Survival bracelet ,Injection Mould ,Mason line ,Inner Tube
North America , South America , Mid East , Eastern Europe , Northern Europe , Central America , Domestic Market , Southeast Asia
You May Also Like
- pvc strip standard grey USD $2 - $2.8 / Ton
- Acrylic Bubble Ball USD $5 - $9 / Kilogram
- Wear-resistance UHMW-PE long strip USD $1 - $100 / Piece
- PVC Heavy Duty Suction Hose 25 mm H56 USD $18 - $19 / Roll
- 1 inch clear plastic deodorant bottle with roll on ball USD $0.008 - $0.02 / Piece
- M PP Plastic Pipe Plug for House/Office Furnitures /Pipe/Wheel USD $0.159 - $0.5 / Piece
- White Plastic Nylon 66 Guide Extrusion USD $0.5 - $5.2 / Piece
- OEM Grey 2-3inches ABS Tube Protector/Cable protector/drivepipe Oval shape USD $0.11 - $0.25 / Piece
- Thermoforming plastic shell,thermoforming products USD $3 - $12 / Piece
- ABS plastic extrusion USD $0.1 - $5 / Piece
- High Precision injection molded plastic parts USD $1,000 - $5,000 / Piece
- China outter case box USD $0.2 - $0.3 / Piece
- plastic diffuser USD $10 - $12 / Piece
- 2016 Chinese cheap mop bucket USD $1 - $2 / Piece
- CNC machined plastic part USD $0.1 - $50 / Piece
- High quality nylon material injection molding parts with nylon material USD $0.05 - $10 / Piece