• abrasive cutting wheel grinding wheel for metal steel stainless steel
  • abrasive cutting wheel grinding wheel for metal steel stainless steel
  • abrasive cutting wheel grinding wheel for metal steel stainless steel
  • abrasive cutting wheel grinding wheel for metal steel stainless steel
  • abrasive cutting wheel grinding wheel for metal steel stainless steel
  • abrasive cutting wheel grinding wheel for metal steel stainless steel
  • abrasive cutting wheel grinding wheel for metal steel stainless steel
  • abrasive cutting wheel grinding wheel for metal steel stainless steel
  • abrasive cutting wheel grinding wheel for metal steel stainless steel
  • abrasive cutting wheel grinding wheel for metal steel stainless steel

abrasive cutting wheel grinding wheel for metal steel stainless steel

  • USD $0.1 - $1.5 / Piece Get Latest Price
  • Keendee
  • T41, T42, T27
  • 24000 Piece / Pieces
  • T/T MoneyGram
  • 10000 Piece / Pieces per Month
  • Qingdao or other ports
Product Details
Shape:Other, Flat shape or Depressed shape Abrasive:Corundum Bonding Agent:Metal
Hardness:Q, F Viscosity:H Size:4" to 16"
Packaging Details craft cartons or printing cartons
Product Description

Product Description

Abrasive cutting wheel grinding wheel for metal steel stainless steel

General purpose cutting and grinding wheels for all metal grinding application. Made of normal corundum. Medium hard bond for an optimal ratio between cutting performance and wheel life.

Application:

- Cutting wheel, cutting of hollow-steel tube, high tensile sheets, thin iron plate, armor plate, steel bar, full-materials, thick-walled tubes, profiles and steel sheeets, etc.

- Grinding wheel, grinding of edges, welds and surfaces, polishing metal, such as steel pipe, armor plate, and so on.

Size:

- T41 Flat Ultra-thin Cutting wheel                                                          

  Wheel size  Max. R.P.M  Q'ty in CTN
  105 X 1.0 X 16 mm   14500 800 pcs
  105 X 1.2 X 16 mm   14500 800 pcs
  105 X 1.6 X 16 mm   14500  600 pcs
  105 X 2.0 X 16 mm   14500  400 pcs
  115 X 1.0 X 22.2 mm   13300  400  pcs
  115 X 1.2 X 22.2 mm   13300  400 pcs
  115 X 1.6 X 22.2 mm   13300  300 pcs
  115 X 2.0 X 22.2 mm   13300  400 pcs
  125 X 1.0 X 22.2 mm   12200  400 pcs
  125 X 1.2 X 22.2 mm    12200  400 pcs
  125 X 1.6 X 22.2 mm   12200  300 pcs
  125 X 2.0 X 22.2 mm   12200  400 pcs
  150 X 1.0 X 22.2 mm   10200  400 pcs
  150 X 1.2 X 22.2 mm   10200  400 pcs
  150 X 1.6 X 22.2 mm   10200  300 pcs
  180 X 1.6 X 22.2 mm   8500  200 pcs
  180 X 2.0 X 22.2 mm   8500  150 pcs
  230 X 2.0 X 22.2 mm   6650  100 pcs

 

 - T42 Depressed Center Cutting and Grinding wheel

  Wheel size  Max. R.P.M   Q'ty in CTN
 100 X 2.0 X 16 mm  15200  400 pcs
 100 X 2.5 X 16 mm  15200  300 pcs
 100 X 3.0 X 16 mm   15200   250 pcs
 115 X 2.0 X 22.2 mm  13300   400 pcs
 115 X 2.5 X 22.2 mm   13300   300 pcs
 115 X 3.0 X 22.2 mm  13300   250 pcs
 125 X 2.0 X 22.2 mm  12200   400 pcs
 125 X 2.5 X 22.2 mm  12200   300 pcs
 125 X 3.0 X 22.2 mm  12200   250 pcs
 150 X 2.0 X 22.2 mm  10200  300 pcs
 150 X 2.5 X 22.2 mm  10200  250 pcs
 150 X 3.0 X 22.2 mm  10200  200 pcs
 180 X 2.0 X 22.2 mm  8500  200 pcs
 180 X 2.5 X 22.2 mm   8500  150 pcs
 180 X 3.0 X 22.2 mm  8500  100 pcs
 230 X 2.0 X 22.2 mm  6600  150 pcs
 230 X 2.5 X 22.2 mm  6600  100 pcs
 230 X 3.0 X 22.2 mm  6600  50 pcs

 -  T27  Depressed Center Grinding wheel

  Wheel size  Max. R.P.M  Q'ty in CTN
  100 X 4 X 16 mm  15200  200 pcs
  100 X 5 X 16 mm  15200  200 pcs
  100 X 6 X 16 mm  15200  200 pcs
  115 X 4 X 16 mm  13300  200 pcs
  115 X 6 X 16 mm  13300  200 pcs
  125 X 4 X 22.2 mm  12200  150 pcs
  125 X 6 X 22.2 mm  12200   100 pcs
  180 X 6 X 22.2 mm  8500  50 pcs
  230 X 7 X 22.2 mm  6650  50 pcs

Company Information

YuHong Abrasivefrom China Aluminum Oxide Raw material hometown, Zhengzhou city. 

Our factory found in 1995, with more than 20 years producing experiences.

YuHong people focus on producing RESIN BOND ABRASIVE CUTTING WHEEL AND DEPRESSED GRINDING WHEEL for general metal, stainless steel, INOX, cast iron etc. materials. 

Our clients from wordwide market. We supply goods to them with different quality grade to meet their local market. 

Keendee brand is one of our brand name, it is especially for overseas market developing.

If you interest ouor products, then contact us freely.

Safety Guide

 A. Safety Recommendations

- Wear protective goggles    - Wear protective gloves    - Wear ear protectors    - Wear dust respirator

- Observe safety recommendations    - No barehanded or hand-hold operation   - No wet grinding    - No side grinding

B. Mounting System

Never use Two different  diameter flanges cutting or grinding, must always keep the two flanges with same outside diameter and support area.

C. Abrasive wheels conveying and storage

1. The abrasive grinding wheel and cut off wheel must be conveyed with complete package to avoid collision and vibration.

2. Store wheels in an area that is dry and protected against damage from impack, solvents (e.g. alkaline), high humidity, and extreme heat or cold.

3. Store wheels horizontally. Oblique or vertical storage will cause damage to the wheel, so does high pressure on surface.

4. Avoid direct contact with ground. Dampness isolating cusion board should be placed between wheel and the ground. Keep the distance between the cushion board and the ground 10-15cm, and the pilling height shall not exceed 1.5m. 

5. Arrange wheels so that older ones will be chosen before new ones.

6. If they have been stored for over one year, the products must be used after the rotation intensity test and apperance check.

D. Mounting and working

1. Ensure that wheels are mounted before using:   - by qualified persons  - according to the manufacturer's instructions  - only on the machines from which they were designed

2. Before mounting a wheel:  -  inspect and test it to ensure that it is safe to use   - check that it is marked to indicate the maximum speed at which it can be used  - turn off and lock out the machine

3. When mounting a wheel, make sure that:  - the machine spindle speed does not exceed the speed which marked on the wheel   - the wheel fits freely, but not loosely on the spindle

4. Use flanges that:

- are equal in diameter and have equal bearing surfaces    - are at least one-third the diamter of the wheel

- have bearing surfaces that are true and free from burrs   - are properly undercut (unless it is a single flange used with a threaded-hole wheel)

5. Where required, use blotters that are free of creases, folds and dirt. Blotters should be just larger than the flanges.

6. Tighten the clamping nuts just enough to hold the wheel firmly.

7. Don't let screws for inserted nut mountings touch the abrasive part of the wheel, use screws taht are just long enough to engage a sufficient length of thread.

8. Make sure that the protective hood is properly adjusted and secured, and that is encloses the wheel as closely as the work will permit.

9. Clean the bearing surfaces of the wheel, flanges and spindles so that the clamping pressure is evenly distributed.

10. Check the speed of the spindle to make sure that it is not too fast for the type and size of wheel.

11. Make sure that the hole in the wheel bushing is the right size for the spindle (neither too small nor too large)

12. Tighten the spindle and nuts just enough to keep the wheel from moving out of position between the flanges.

13. Do not use cutting wheels as grinding wheels.

Zhengzhou Yuhong Abrasive Co., Ltd.

We Provide

Abrasive products ,Cutting disc ,Grinding Disc ,Cutting wheel ,Grinding Wheel

Main Markets

Domestic Market , Eastern Europe , Western Europe , South Asia , North America , Mid East

Contact Now

Sourcing Request

Submit